String it. Send it.Make the ball misbehave.PICK A SPOT, RUIN THE POINTString with intent.Snap strings, not sticks.String it. Send it.Make the ball misbehave.PICK A SPOT, RUIN THE POINTString with intent.

Volkl · V-SENSE

V-SENSE 10 295/325

16M X 19C · Start not confirmed

Mains start: not confirmed

The starting end is not documented for this frame. Check the manufacturer's instructions before you pull the first main.

Two-piece routing is documented in a distributor pattern table, not an approved manufacturer route.

HEADTHROAT / HANDLE2 · FIRST CROSS 8T
01 / Mains startNot documented
02 / First cross8T
Pattern16M X 19C
Tension range50 - 60 lb
○ Hole◇ Skipped main hole (takes a cross)□ Mains tie-off⊘ Cross tie-off

Diagram template {schematic}: hole spacing is illustrative, not a measured grommet map. Hole references keep their original notation (T = head (top), B = throat (bottom)).

In words

  1. Starting end unconfirmed for this frame — confirm it on the manufacturer sheet before you start the mains.
  2. Skip 8T - 8B on the mains. Those holes are for crosses.
  3. Tie the mains off at 7T.
  4. Start the crosses at 8T and weave down.
  5. Finish the crosses at 6T - 11B.

Still missing for this frame

Mains starting end · Frame hole map and diagram review

This page is kept out of search until those are checked against the manufacturer's own instructions.

What goes in it

Once the frame is strung, the string is the variable that decides what the ball does.

SNAP SpinBite and shapeSNAP ControlA flatter, first-strike gameOne set of eachNot sureStringing guideTension guidance

String it. Send it.